diff options
Diffstat (limited to 'nvim')
| -rw-r--r-- | nvim/dot-config/nvim-final/after/ftplugin/lua.lua | 3 | ||||
| -rw-r--r-- | nvim/dot-config/nvim-final/colors/solarized.lua | 490 | ||||
| -rw-r--r-- | nvim/dot-config/nvim-final/init.lua | 719 | ||||
| -rw-r--r-- | nvim/dot-config/nvim-final/lua/mo/zen.lua | 89 | ||||
| -rw-r--r-- | nvim/dot-config/nvim-final/nvim-pack-lock.json | 12 | ||||
| -rw-r--r-- | nvim/dot-config/nvim-final/plugin/autocommands.lua | 7 | ||||
| -rw-r--r-- | nvim/dot-config/nvim-final/plugin/treesitter.lua | 42 | ||||
| -rw-r--r-- | nvim/dot-config/nvim-final/stylua.toml | 12 |
8 files changed, 0 insertions, 1374 deletions
diff --git a/nvim/dot-config/nvim-final/after/ftplugin/lua.lua b/nvim/dot-config/nvim-final/after/ftplugin/lua.lua deleted file mode 100644 index 53dd1d2..0000000 --- a/nvim/dot-config/nvim-final/after/ftplugin/lua.lua +++ /dev/null @@ -1,3 +0,0 @@ -vim.cmd([[ -setlocal keywordprg=:help -]]) diff --git a/nvim/dot-config/nvim-final/colors/solarized.lua b/nvim/dot-config/nvim-final/colors/solarized.lua deleted file mode 100644 index 090090b..0000000 --- a/nvim/dot-config/nvim-final/colors/solarized.lua +++ /dev/null @@ -1,490 +0,0 @@ -local function oklab_to_linear_rgb(L, a, b) - -- Oklab to LMS conversion - -- Reference: Björn Ottosson, "A perceptual color space for image processing" - local l = L + 0.3963377774 * a + 0.2158037573 * b - local m = L - 0.1055613458 * a - 0.0638541728 * b - local s = L - 0.0894841775 * a - 1.2914855480 * b - - -- LMS to linear RGB - -- Cube the LMS values (inverse of cube root) - local l3, m3, s3 = l * l * l, m * m * m, s * s * s - - -- Linear RGB transformation matrix - local r = 4.0767416621 * l3 - 3.3077115913 * m3 + 0.2309699292 * s3 - local g = -1.2684380046 * l3 + 2.6097574011 * m3 - 0.3413193965 * s3 - local b_out = -0.0041960863 * l3 - 0.7034186147 * m3 + 1.7076147010 * s3 - - return r, g, b_out -end - -local function linear_to_srgb_component(c) - -- sRGB gamma correction (companding) - -- Reference: IEC 61966-2-1:1999 - if c <= 0.0031308 then - return c * 12.92 -- Linear segment - else - return 1.055 * (c ^ (1 / 2.4)) - 0.055 -- Power function (gamma ≈ 2.2) - end -end - -local function oklab_to_srgb(L, a, b) - local r, g, b_comp = oklab_to_linear_rgb(L, a, b) - - r = linear_to_srgb_component(r) - g = linear_to_srgb_component(g) - b_comp = linear_to_srgb_component(b_comp) - - -- Clamp and convert to 8-bit - r = math.floor(math.max(0, math.min(1, r)) * 255 + 0.5) - g = math.floor(math.max(0, math.min(1, g)) * 255 + 0.5) - b_comp = math.floor(math.max(0, math.min(1, b_comp)) * 255 + 0.5) - - return string.format('#%02x%02x%02x', r, g, b_comp) -end - --- ═══════════════════════════════════════════════════════════════════════════ --- MONOTONE COLORS --- ═══════════════════════════════════════════════════════════════════════════ -local base03 = oklab_to_srgb(0.267337, -0.037339, -0.031128) -local base02 = oklab_to_srgb(0.309207, -0.039852, -0.033029) -local base01 = oklab_to_srgb(0.523013, -0.021953, -0.017864) -local base00 = oklab_to_srgb(0.568165, -0.021219, -0.019038) - -local base0 = oklab_to_srgb(0.709236, -0.023223, -0.013451) -local base1 = oklab_to_srgb(0.697899, -0.015223, -0.004594) -local base2 = oklab_to_srgb(0.930609, -0.001091, 0.026010) -local base3 = oklab_to_srgb(0.973528, -0.000043, 0.026053) - --- ═══════════════════════════════════════════════════════════════════════════ --- ACCENT COLORS --- ═══════════════════════════════════════════════════════════════════════════ -local yellow = oklab_to_srgb(0.654479, 0.010005, 0.133641) -local orange = oklab_to_srgb(0.63, 0.133661 * 0.69, 0.110183 * 0.69) -local red = oklab_to_srgb(0.63, 0.183749 * 0.72, 0.094099 * 0.72) -local magenta = oklab_to_srgb(0.592363, 0.201958, -0.014497) -local violet = oklab_to_srgb(0.582316, 0.019953, -0.124557) -local blue = oklab_to_srgb(0.614879, -0.059069, -0.126255) -local cyan = oklab_to_srgb(0.643664, -0.101063, -0.013097) -local green = oklab_to_srgb(0.644391, -0.072203, 0.132448) - --- ═══════════════════════════════════════════════════════════════════════════ --- MODE SELECTION --- ═══════════════════════════════════════════════════════════════════════════ - --- Set to 'dark' or 'light' -local mode = vim.o.background or 'dark' - -local colors = {} - -if mode == 'dark' then - -- Dark mode: dark background, light text - colors.bg = base03 - colors.bg_highlight = base02 - colors.fg_comment = base01 - colors.fg = base0 - colors.fg_emphasis = base1 -else - colors.bg = base3 - colors.bg_highlight = base2 - colors.fg_comment = base1 - colors.fg = base00 - colors.fg_emphasis = base01 -end - --- Accent colors are the same in both modes -colors.yellow = yellow -colors.orange = orange -colors.red = red -colors.magenta = magenta -colors.violet = violet -colors.blue = blue -colors.cyan = cyan -colors.green = green - -colors.cursorline_bg = colors.bg_highlight -colors.selection_bg = base02 -colors.visual_bg = base02 - -vim.g.colors_name = 'dicom' - -local function h(group, properties) - vim.api.nvim_set_hl(0, group, properties) -end - -local function hex_to_rgb(hex) - hex = hex:gsub('#', '') - return { - tonumber(hex:sub(1, 2), 16), - tonumber(hex:sub(3, 4), 16), - tonumber(hex:sub(5, 6), 16), - } -end - -local function rgb_to_hex(c) - return string.format('#%02x%02x%02x', c[1], c[2], c[3]) -end - -local function blend(fg, t, target_bg) - local a, b = hex_to_rgb(fg), hex_to_rgb(target_bg or colors.bg) - local c = { - math.floor(a[1] * (1 - t) + b[1] * t + 0.5), - math.floor(a[2] * (1 - t) + b[2] * t + 0.5), - math.floor(a[3] * (1 - t) + b[3] * t + 0.5), - } - return rgb_to_hex(c) -end - --- ============================================================================= --- Research-Driven Syntax Highlighting Strategy --- Based on: Hannebauer et al. (2018), Tonsky (2025), Schloss (2023) --- ============================================================================= - --- 1. Core Editor Surface -h('Normal', { fg = colors.fg, bg = colors.bg }) -h('EndOfBuffer', { fg = colors.bg }) -h('CursorLine', { bg = colors.cursorline_bg }) -h('CursorLineNr', { fg = colors.yellow, bold = true }) -h('LineNr', { fg = colors.fg_comment }) -h('WinSeparator', { fg = colors.bg_highlight, bg = colors.bg }) - --- 2. Visual & Search (High Arousal) -h('Visual', { bg = colors.selection_bg }) -h('Search', { fg = colors.bg, bg = colors.yellow }) -h('IncSearch', { fg = colors.bg, bg = colors.orange }) - -h('Keyword', { fg = colors.green }) -h('Statement', { fg = colors.green }) -h('Conditional', { fg = colors.green }) -h('Repeat', { fg = colors.green }) - -h('Function', { fg = colors.blue }) - --- Types -h('Type', { fg = colors.yellow }) -h('StorageClass', { fg = colors.yellow }) -h('Structure', { fg = colors.yellow }) -h('Typedef', { fg = colors.yellow }) - --- Constants -h('Constant', { fg = colors.cyan }) -h('String', { fg = colors.cyan }) -h('Character', { fg = colors.cyan }) -h('Number', { fg = colors.cyan }) -h('Boolean', { fg = colors.cyan }) -h('Float', { fg = colors.cyan }) - --- PreProc -h('PreProc', { fg = colors.orange }) -h('Include', { fg = colors.orange }) -h('Define', { fg = colors.orange }) -h('Macro', { fg = colors.orange }) -h('PreCondit', { fg = colors.orange }) - --- Special Characters - Cyan (escape/special) -h('Special', { fg = colors.cyan }) - -h('Identifier', { fg = colors.fg }) -h('Variable', { fg = colors.fg }) -h('Operator', { fg = colors.fg }) - -h('Delimiter', { fg = colors.fg }) -h('NonText', { fg = colors.bg_highlight }) - --- ----------------------------------------------------------------------------- --- Layer 6: COMMENTS --- Luminance: L=comment (dimmest) --- ----------------------------------------------------------------------------- - -h('Comment', { fg = colors.fg_comment, italic = true }) - --- ============================================================================= --- 4. UI Components --- ============================================================================= - -h('StatusLine', { bg = colors.fg, fg = colors.bg_highlight }) -h('StatusLineNC', { bg = colors.fg_comment, fg = colors.bg_highlight }) -h('WildMenu', { fg = colors.bg, bg = colors.blue }) -h('ColorColumn', { bg = colors.bg_highlight }) - --- Popup Menu -h('Pmenu', { fg = colors.fg, bg = colors.bg_highlight }) -h('PmenuSel', { fg = colors.fg_emphasis, bg = colors.selection, reverse = true }) -h('PmenuSbar', { bg = colors.bg_highlight }) -h('PmenuThumb', { bg = colors.fg_comment }) -h('PmenuMatch', { fg = colors.cyan, bold = true }) -h('PmenuMatchSel', { bg = colors.selection, bold = true, fg = colors.fg_emphasis }) - --- Float & Borders -h('NormalFloat', { bg = colors.bg_highlight }) -h('FloatBorder', { fg = colors.comment }) -h('Title', { fg = colors.bg_highlight, bold = true }) - --- ============================================================================= --- 5. Diagnostics - Semantic Consistency --- ============================================================================= --- --- Research basis (Schloss 2023): --- Color-concept associations are universal: --- Red → danger/anger (cross-cultural consistency) --- Orange → warning/caution --- Blue → information/calm --- Cyan → hint/auxiliary --- --- This mapping perfectly aligns with research! ✓ --- - -h('ErrorMsg', { fg = colors.red, bold = true }) -h('WarningMsg', { fg = colors.orange }) -h('ModeMsg', { fg = colors.cyan, bold = true }) -h('Todo', { fg = colors.violet, bold = true, reverse = true }) -h('MatchParen', { bg = colors.selection_bg, bold = true }) - --- QuickFix & List -h('qfFileName', { fg = colors.blue }) -h('qfLineNr', { fg = colors.cyan }) -h('qfSeparator', { fg = colors.bg_highlight }) -h('QuickFixLine', { bg = colors.cursorline_bg, bold = true }) -h('qfText', { link = 'Normal' }) - --- Underlined/Directory -h('Underlined', { fg = colors.violet, underline = true }) -h('Directory', { fg = colors.blue }) - --- sync to terminal -h('Magenta', { fg = colors.magenta }) -h('Violet', { fg = colors.violet }) - --- ============================================================================= --- 6. Treesitter Highlights (Optimized) --- ============================================================================= - --- Neutral Layer ⭐️ KEY OPTIMIZATION -h('@variable', { link = 'Identifier' }) -- Neutral -h('@variable.builtin', { link = '@variable' }) -- Neutral -h('@variable.parameter', { link = '@variable' }) -- Neutral -h('@variable.parameter.builtin', { link = '@variable.builtin' }) -h('@variable.member', { link = '@variable' }) -- Neutral -h('@parameter', { fg = colors.fg }) -- Neutral -h('@property', { fg = colors.fg }) -- Neutral - --- Constants Layer ⭐️ OPTIMIZED -h('@constant', { fg = colors.cyan }) -- Constants = frozen -h('@constant.builtin', { fg = colors.cyan }) -h('@constant.macro', { fg = colors.cyan }) - --- Modules/Namespaces -h('@module', { link = 'Identifier' }) -h('@module.builtin', { link = '@module' }) - --- Labels -h('@label', { link = 'Label' }) - --- Strings Layer -h('@string', { link = 'String' }) -h('@string.documentation', { link = 'Comment' }) -h('@string.regexp', { link = '@string' }) -h('@string.escape', { link = 'Special' }) -h('@string.special', { link = '@string' }) -h('@string.special.symbol', { link = '@string' }) -h('@string.special.path', { link = '@string' }) -h('@string.special.url', { link = 'Underlined' }) - -h('@character', { link = 'String' }) -h('@character.special', { link = '@character' }) - --- Numbers Layer -h('@boolean', { link = 'Constant' }) -h('@number', { link = 'Number' }) -h('@number.float', { link = 'Float' }) - --- Types Layer -h('@type', { link = 'Type' }) -h('@type.builtin', { link = 'Type' }) -h('@type.definition', { link = 'Type' }) - --- Attributes/Decorators -h('@attribute', { link = 'Macro' }) -h('@attribute.builtin', { link = 'Special' }) - --- Functions Layer -h('@function', { link = 'Function' }) -h('@function.builtin', { link = 'Function' }) -h('@function.call', { link = '@function' }) -h('@function.macro', { link = '@function' }) -h('@function.method', { link = '@function' }) -h('@function.method.call', { link = '@function' }) -h('@constructor', { link = 'Function' }) - --- Operators - Neutral -h('@operator', { link = 'Operator' }) - --- Keywords Layer -h('@keyword', { link = 'Keyword' }) -h('@keyword.coroutine', { link = '@keyword' }) -h('@keyword.function', { link = 'Keyword' }) -h('@keyword.operator', { link = '@keyword' }) -h('@keyword.import', { link = 'PreProc' }) -h('@keyword.type', { link = '@keyword' }) -h('@keyword.modifier', { link = '@keyword' }) -h('@keyword.repeat', { link = 'Repeat' }) -h('@keyword.return', { link = '@keyword' }) -h('@keyword.debug', { link = '@keyword' }) -h('@keyword.exception', { link = '@keyword' }) -h('@keyword.conditional', { link = 'Conditional' }) -h('@keyword.conditional.ternary', { link = '@operator' }) -h('@keyword.directive', { link = '@keyword' }) -h('@keyword.directive.define', { link = '@keyword' }) - --- Punctuation -h('@punctuation', { fg = colors.fg }) -h('@punctuation.delimiter', { link = '@punctuation' }) -h('@punctuation.bracket', { link = '@punctuation' }) -h('@punctuation.special', { link = '@punctuation' }) - --- Comments Layer -h('@comment', { link = 'Comment' }) -h('@comment.documentation', { link = '@comment' }) -h('@comment.error', { fg = colors.red, bold = true }) -h('@comment.warning', { fg = colors.yellow, bold = true }) -h('@comment.todo', { link = 'Special' }) -h('@comment.note', { link = 'Special' }) - --- Markup (Markdown, etc.) -h('@markup', { link = 'Comment' }) -h('@markup.strong', { bold = true }) -h('@markup.italic', { italic = true }) -h('@markup.strikethrough', { strikethrough = true }) -h('@markup.underline', { link = 'Underlined' }) -h('@markup.heading', { link = 'Title' }) -h('@markup.heading.1', { link = '@markup.heading' }) -h('@markup.heading.2', { link = '@markup.heading' }) -h('@markup.heading.3', { link = '@markup.heading' }) -h('@markup.heading.4', { link = '@markup.heading' }) -h('@markup.heading.5', { link = '@markup.heading' }) -h('@markup.heading.6', { link = '@markup.heading' }) -h('@markup.quote', {}) -h('@markup.math', { link = 'String' }) -h('@markup.link', { link = 'Underlined' }) -h('@markup.link.label', { link = '@markup.link' }) -h('@markup.link.url', { link = '@markup.link' }) -h('@markup.raw', {}) -h('@markup.raw.block', { link = '@markup.raw' }) -h('@markup.list', {}) -h('@markup.list.checked', { fg = colors.green }) -h('@markup.list.unchecked', { link = '@markup.list' }) - --- Diff -h('@diff.plus', { fg = blend(colors.green, 0.5, colors.statusline_bg) }) -h('@diff.minus', { fg = blend(colors.red, 0.5, colors.statusline_bg) }) -h('@diff.delta', { fg = blend(colors.yellow, 0.5, colors.statusline_bg) }) - --- HTML/XML -h('@tag', { fg = colors.green }) -h('@tag.attribute', { fg = colors.fg }) -h('@tag.delimiter', { fg = colors.fg }) -h('@tag.builtin', { link = 'Special' }) - --- Vimdoc Special Handling -h('@constant.comment', { link = 'SpecialComment' }) -h('@number.comment', { link = 'Comment' }) -h('@punctuation.bracket.comment', { link = 'SpecialComment' }) -h('@punctuation.delimiter.comment', { link = 'SpecialComment' }) -h('@label.vimdoc', { link = 'String' }) -h('@markup.heading.1.delimiter.vimdoc', { link = '@markup.heading.1' }) -h('@markup.heading.2.delimiter.vimdoc', { link = '@markup.heading.2' }) - --- Semantic Aliases -h('@class', { fg = colors.yellow }) -h('@method', { fg = colors.blue }) -h('@interface', { fg = colors.yellow }) -h('@namespace', { fg = colors.fg }) - --- ============================================================================= --- 7. LSP Semantic Highlights --- ============================================================================= - -h('@lsp.type.class', { link = '@type' }) -h('@lsp.type.comment', { link = '@comment' }) -h('@lsp.type.decorator', { link = '@attribute' }) -h('@lsp.type.enum', { link = '@type' }) -h('@lsp.type.enumMember', { link = '@constant' }) -h('@lsp.type.event', { link = '@type' }) -h('@lsp.type.function', { link = '@function' }) -h('@lsp.type.interface', { link = '@type' }) -h('@lsp.type.keyword', { link = '@keyword' }) -h('@lsp.type.macro', { link = 'Macro' }) -h('@lsp.type.method', { link = '@function.method' }) -h('@lsp.type.modifier', { link = '@type.qualifier' }) -h('@lsp.type.namespace', { link = '@module' }) -h('@lsp.type.number', { link = '@number' }) -h('@lsp.type.operator', { link = '@operator' }) -h('@lsp.type.parameter', { fg = colors.fg }) -h('@lsp.type.property', { fg = colors.fg }) -h('@lsp.type.regexp', { link = '@string.regexp' }) -h('@lsp.type.string', { link = '@string' }) -h('@lsp.type.struct', { link = '@type' }) -h('@lsp.type.type', { link = '@type' }) -h('@lsp.type.typeParameter', { link = '@type.definition' }) -h('@lsp.type.variable', { link = '@variable' }) - --- LSP Modifiers -h('@lsp.mod.abstract', {}) -h('@lsp.mod.async', {}) -h('@lsp.mod.declaration', {}) -h('@lsp.mod.defaultLibrary', {}) -h('@lsp.mod.definition', {}) -h('@lsp.mod.deprecated', { link = 'DiagnosticDeprecated' }) -h('@lsp.mod.documentation', {}) -h('@lsp.mod.modification', {}) -h('@lsp.mod.readonly', {}) -h('@lsp.mod.static', {}) - --- ============================================================================= --- 8. Diagnostics - Semantic Consistency (Schloss 2023) --- ============================================================================= - -h('DiagnosticError', { fg = colors.red }) -h('DiagnosticWarn', { fg = colors.yellow }) -h('DiagnosticInfo', { fg = colors.blue }) -h('DiagnosticHint', { fg = colors.cyan }) - -h('DiagnosticVirtualTextError', { bg = blend(colors.red, 0.4) }) -h('DiagnosticVirtualTextWarn', { bg = blend(colors.yellow, 0.4) }) -h('DiagnosticVirtualTextInfo', { bg = blend(colors.blue, 0.4) }) -h('DiagnosticVirtualTextHint', { bg = blend(colors.cyan, 0.4) }) - -h('DiagnosticPrefixError', { fg = colors.red, bg = blend(colors.red, 0.25) }) -h('DiagnosticPrefixWarn', { fg = colors.yellow, bg = blend(colors.yellow, 0.25) }) -h('DiagnosticPrefixInfo', { fg = colors.blue, bg = blend(colors.blue, 0.25) }) -h('DiagnosticPrefixHint', { fg = colors.cyan, bg = blend(colors.cyan, 0.25) }) - -h('DiagnosticUnderlineError', { undercurl = true, sp = colors.red }) -h('DiagnosticUnderlineWarn', { undercurl = true, sp = colors.yellow }) -h('DiagnosticUnderlineInfo', { undercurl = true, sp = colors.blue }) -h('DiagnosticUnderlineHint', { undercurl = true, sp = colors.cyan }) -h('YankHighlight', { fg = colors.bg, bg = colors.fg }) - --- ============================================================================= --- 9. LSP & Other Plugin Support --- ============================================================================= - -h('LspReferenceText', { bg = colors.selection_bg }) -h('LspReferenceRead', { bg = colors.selection_bg }) -h('LspReferenceWrite', { bg = colors.selection_bg }) -h('LspReferenceTarget', { link = 'LspReferenceText' }) -h('LspInlayHint', { link = 'NonText' }) -h('LspCodeLens', { link = 'NonText' }) -h('LspCodeLensSeparator', { link = 'NonText' }) -h('LspSignatureActiveParameter', { link = 'LspReferenceText' }) - --- Indentmini -h('IndentLine', { link = 'Comment' }) -h('IndentLineCurrent', { link = 'Comment' }) - --- GitSigns -h('GitSignsAdd', { fg = colors.green }) -h('GitSignsChange', { fg = colors.orange }) -h('GitSignsDelete', { fg = colors.red }) - --- Dashboard -h('DashboardHeader', { fg = colors.green }) diff --git a/nvim/dot-config/nvim-final/init.lua b/nvim/dot-config/nvim-final/init.lua deleted file mode 100644 index eb9074d..0000000 --- a/nvim/dot-config/nvim-final/init.lua +++ /dev/null @@ -1,719 +0,0 @@ -vim.loader.enable(true) - -vim.pack.add({ - "https://github.com/nvim-treesitter/nvim-treesitter", -}, { confirm = false }) - -vim.pack.add({ - "https://github.com/zenbones-theme/zenbones.nvim", -}, { load = false }) - -require("mo.zen").setup("seoulbones") - -require("vim._extui").enable({}) -vim.cmd([[ packadd! nvim.undotree ]]) - -vim.cmd([[ -nnoremap - <Cmd>Ex<CR> - -nnoremap <expr> [e '<Cmd>.move --' . v:count1 . '<CR>' -nnoremap <expr> ]e '<Cmd>.move +' . v:count1 . '<CR>' -xnoremap <expr> [e ':move --' . v:count1 . '<CR>gv' -xnoremap <expr> ]e ':move +' . (v:count1 + line('''>') - line('''<')) . '<CR>gv' - -function! Sort(type, ...) abort - '[,']sort - call setpos('.', getpos("''")) -endfunction -nnoremap gs m'<Cmd>set operatorfunc=Sort<CR>g@ -xnoremap gs :sort<CR> -]]) - -vim.keymap.set("n", "gK", "K") - -vim.o.expandtab = true -vim.o.shiftwidth = 4 -vim.o.tabstop = 4 - -vim.o.breakindent = true --- Every wrapped line will continue visually indented (same amount of --- space as the beginning of that line), thus preserving horizontal --- blocks of text. - -vim.o.cinoptions = "l1,:0,g0,E-s,N-s,t0,(s,J1,j1" --- The 'cinoptions' affect the way 'cindent' reindents lines in a C --- program. - -vim.o.colorcolumn = "+1" --- 'colorcolumn' is a comma-separated list of screen columns that are --- highlighted with ColorColumn |hl-ColorColumn|. Useful to align --- text. Will make screen redrawing slower. --- The screen column can be an absolute number, or a number preceded with --- '+' or '-', which is added to or subtracted from 'textwidth'. --- When 'textwidth' is zero then the items with '-' and '+' are not used. - -vim.o.completeopt = "menu,menuone,preview,noselect,fuzzy" --- 'completeopt' 'cot' string (default "menu,popup") --- global or local to buffer |global-local| --- A comma-separated list of options for Insert mode completion --- |ins-completion|. The supported values are: --- --- fuzzy Enable |fuzzy-matching| for completion candidates. This --- allows for more flexible and intuitive matching, where --- characters can be skipped and matches can be found even --- if the exact sequence is not typed. --- --- longest --- When 'autocomplete' is not active, only the longest common --- prefix of the matches is inserted. If the popup menu is --- displayed, you can use CTRL-L to add more characters. --- Whether case is ignored depends on the type of completion. --- For buffer text the 'ignorecase' option applies. --- --- When 'autocomplete' is active and no completion item is --- selected, the longest common prefix of the matches is --- inserted after the cursor. The prefix is taken either --- from all displayed items or only from items in the current --- buffer. The inserted text is highlighted with --- |hl-PreInsert|, and the cursor position does not change --- (similar to `"preinsert"`). Press CTRL-Y to accept. --- See also |preinserted()|. --- --- menu Use a popup menu to show the possible completions. The --- menu is only shown when there is more than one match and --- sufficient colors are available. |ins-completion-menu| --- --- menuone Use the popup menu also when there is only one match. --- Useful when there is additional information about the --- match, e.g., what file it comes from. --- --- nearest Matches are listed based on their proximity to the cursor --- position, unlike the default behavior, which only --- considers proximity for matches appearing below the --- cursor. This applies only to matches from the current --- buffer. No effect if "fuzzy" is present. --- --- noinsert Do not insert any text for a match until the user selects --- a match from the menu. Only works in combination with --- "menu" or "menuone". No effect if "longest" is present. --- --- noselect Same as "noinsert", except that no menu item is --- pre-selected. If both "noinsert" and "noselect" are --- present, "noselect" takes precedence. This is enabled --- automatically when 'autocomplete' is on, unless --- "preinsert" is also enabled. --- --- nosort Disable sorting of completion candidates based on fuzzy --- scores when "fuzzy" is enabled. Candidates will appear --- in their original order. --- --- popup Show extra information about the currently selected --- completion in a popup window. Only works in combination --- with "menu" or "menuone". Overrides "preview". --- --- preinsert --- Inserts the text of the first completion candidate beyond --- the current leader, highlighted with |hl-PreInsert|. --- The cursor does not move. --- Requires "fuzzy" to be unset, and either "menuone" in --- 'completeopt' or 'autocomplete' enabled. When --- 'autocomplete' is enabled, this does not work if --- 'ignorecase' is set without 'infercase'. --- See also |preinserted()|. --- --- preview Show extra information about the currently selected --- completion in the preview window. Only works in --- combination with "menu" or "menuone". --- --- Only "fuzzy", "longest", "popup", "preinsert" and "preview" have an --- effect when 'autocomplete' is enabled. --- --- This option does not apply to |cmdline-completion|. See 'wildoptions' --- for that. -vim.opt.cpoptions:remove("~") --- 'cpoptions' 'cpo' string (default "aABceFs_") --- global --- A sequence of single character flags. When a character is present --- this indicates Vi-compatible behavior. This is used for things where --- not being Vi-compatible is mostly or sometimes preferred. --- 'cpoptions' stands for "compatible-options". --- Commas can be added for readability. --- To avoid problems with flags that are added in the future, use the --- "+=" and "-=" feature of ":set" |add-option-flags|. -vim.o.cursorline = true -vim.o.cursorlineopt = "number" -vim.o.foldlevelstart = 99 --- 'foldlevelstart' 'fdls' number (default -1) --- global --- Sets 'foldlevel' when starting to edit another buffer in a window. --- Useful to always start editing with all folds closed (value zero), --- some folds closed (one) or no folds closed (99). --- This is done before reading any modeline, thus a setting in a modeline --- overrules this option. Starting to edit a file for |diff-mode| also --- ignores this option and closes all folds. --- It is also done before BufReadPre autocommands, to allow an autocmd to --- overrule the 'foldlevel' value for specific files. --- When the value is negative, it is not used. -vim.o.foldtext = "" --- 'foldtext' 'fdt' string (default "foldtext()") --- local to window --- An expression which is used to specify the text displayed for a closed --- fold. The context is set to the script where 'foldexpr' was set, --- script-local items can be accessed. See |fold-foldtext| for the --- usage. --- --- The expression will be evaluated in the |sandbox| if set from a --- modeline, see |sandbox-option|. --- This option cannot be set in a modeline when 'modelineexpr' is off. --- --- It is not allowed to change text or jump to another window while --- evaluating 'foldtext' |textlock|. --- --- When set to an empty string, foldtext is disabled, and the line --- is displayed normally with highlighting and no line wrapping. -vim.o.ignorecase = true --- 'ignorecase' 'ic' boolean (default off) --- global --- Ignore case in search patterns, |cmdline-completion|, when --- searching in the tags file, |expr-==| and for Insert-mode completion --- |ins-completion|. --- Also see 'smartcase' and 'tagcase'. --- Can be overruled by using "\c" or "\C" in the pattern, see --- |/ignorecase|. -vim.o.smartcase = true --- Override the 'ignorecase' option if the search pattern contains upper --- case characters. Only used when the search pattern is typed and --- 'ignorecase' option is on. Used for the commands "/", "?", "n", "N", --- ":g" and ":s" and when filtering matches for the completion menu --- |compl-states|. --- Not used for "*", "#", "gd", tag search, etc. After "*" and "#" you --- can make 'smartcase' used by doing a "/" command, recalling the search --- pattern from history and hitting <Enter>. -vim.o.jumpoptions = "view,clean" --- 'jumpoptions' 'jop' string (default "clean") --- global --- List of words that change the behavior of the |jumplist|. --- stack Make the jumplist behave like the tagstack. --- Relative location of entries in the jumplist is --- preserved at the cost of discarding subsequent entries --- when navigating backwards in the jumplist and then --- jumping to a location. |jumplist-stack| --- --- view When moving through the jumplist, |changelist|, --- |alternate-file|, using |mark-motions| or when popping --- the |tagstack| try to restore the |mark-view| in which --- the action occurred. --- --- clean Remove unloaded buffers from the jumplist. --- EXPERIMENTAL: this flag may change in the future. -vim.o.linebreak = true --- 'linebreak' 'lbr' boolean (default off) --- local to window --- If on, Vim will wrap long lines at a character in 'breakat' rather --- than at the last character that fits on the screen. Unlike --- 'wrapmargin' and 'textwidth', this does not insert <EOL>s in the file, --- it only affects the way the file is displayed, not its contents. --- If 'breakindent' is set, line is visually indented. Then, the value --- of 'showbreak' is used to put in front of wrapped lines. This option --- is not used when the 'wrap' option is off. --- Note that <Tab> characters after an <EOL> are mostly not displayed --- with the right amount of white space. -vim.o.list = true --- 'list' boolean (default off) --- local to window --- List mode: By default, show tabs as ">", trailing spaces as "-", and --- non-breakable space characters as "+". Useful to see the difference --- between tabs and spaces and for trailing blanks. Further changed by --- the 'listchars' option. --- --- When 'listchars' does not contain "tab" field, tabs are shown as "^I" --- or "<09>", like how unprintable characters are displayed. --- --- The cursor is displayed at the start of the space a Tab character --- occupies, not at the end as usual in Normal mode. To get this cursor --- position while displaying Tabs with spaces, use: >vim --- set list lcs=tab:\ \ --- < --- Note that list mode will also affect formatting (set with 'textwidth' --- or 'wrapmargin') when 'cpoptions' includes 'L'. See 'listchars' for --- changing the way tabs are displayed. -vim.opt.listchars:append("precedes:<", "extends:>") --- 'listchars' 'lcs' string (default "tab:> ,trail:-,nbsp:+") --- global or local to window |global-local| --- Strings to use in 'list' mode and for the |:list| command. It is a --- comma-separated list of string settings. *E1511* --- --- *lcs-eol* --- eol:c Character to show at the end of each line. When --- omitted, there is no extra character at the end of the --- line. --- *lcs-tab* --- tab:xy[z] Two or three characters to be used to show a tab. --- The third character is optional. --- --- tab:xy The 'x' is always used, then 'y' as many times as will --- fit. Thus "tab:>-" displays: > --- > --- >- --- >-- --- etc. --- < --- tab:xyz The 'z' is always used, then 'x' is prepended, and --- then 'y' is used as many times as will fit. Thus --- "tab:<->" displays: > --- > --- <> --- <-> --- <--> --- etc. --- < --- When "tab:" is omitted, a tab is shown as ^I. --- *lcs-space* --- space:c Character to show for a space. When omitted, spaces --- are left blank. --- *lcs-multispace* --- multispace:c... --- One or more characters to use cyclically to show for --- multiple consecutive spaces. Overrides the "space" --- setting, except for single spaces. When omitted, the --- "space" setting is used. For example, --- `:set listchars=multispace:---+` shows ten consecutive --- spaces as: > --- ---+---+-- --- < --- *lcs-lead* --- lead:c Character to show for leading spaces. When omitted, --- leading spaces are blank. Overrides the "space" and --- "multispace" settings for leading spaces. You can --- combine it with "tab:", for example: >vim --- set listchars+=tab:>-,lead:. --- < --- *lcs-leadmultispace* --- leadmultispace:c... --- Like the |lcs-multispace| value, but for leading --- spaces only. Also overrides |lcs-lead| for leading --- multiple spaces. --- `:set listchars=leadmultispace:---+` shows ten --- consecutive leading spaces as: > --- ---+---+--XXX --- < --- Where "XXX" denotes the first non-blank characters in --- the line. --- *lcs-trail* --- trail:c Character to show for trailing spaces. When omitted, --- trailing spaces are blank. Overrides the "space" and --- "multispace" settings for trailing spaces. --- *lcs-extends* --- extends:c Character to show in the last column, when 'wrap' is --- off and the line continues beyond the right of the --- screen. --- *lcs-precedes* --- precedes:c Character to show in the first visible column of the --- physical line, when there is text preceding the --- character visible in the first column. --- *lcs-conceal* --- conceal:c Character to show in place of concealed text, when --- 'conceallevel' is set to 1. A space when omitted. --- *lcs-nbsp* --- nbsp:c Character to show for a non-breakable space character --- (0xA0 (160 decimal) and U+202F). Left blank when --- omitted. --- --- The characters ':' and ',' should not be used. UTF-8 characters can --- be used. All characters must be single width. *E1512* --- --- Each character can be specified as hex: >vim --- set listchars=eol:\\x24 --- set listchars=eol:\\u21b5 --- set listchars=eol:\\U000021b5 --- < Note that a double backslash is used. The number of hex characters --- must be exactly 2 for \\x, 4 for \\u and 8 for \\U. --- --- Examples: >vim --- set lcs=tab:>-,trail:- --- set lcs=tab:>-,eol:<,nbsp:% --- set lcs=extends:>,precedes:< --- < |hl-NonText| highlighting will be used for "eol", "extends" and --- "precedes". |hl-Whitespace| for "nbsp", "space", "tab", "multispace", --- "lead" and "trail". -vim.o.number = true -vim.o.pumheight = 10 --- 'pumheight' 'ph' number (default 0) --- global --- Maximum number of items to show in the popup menu --- (|ins-completion-menu|). Zero means "use available screen space". -vim.o.scrolloff = 2 --- 'scrolloff' 'so' number (default 0) --- global or local to window |global-local| --- Minimal number of screen lines to keep above and below the cursor. --- This will make some context visible around where you are working. If --- you set it to a very large value (999) the cursor line will always be --- in the middle of the window (except at the start or end of the file or --- when long lines wrap). --- After using the local value, go back the global value with one of --- these two: >vim --- setlocal scrolloff< --- setlocal scrolloff=-1 --- < For scrolling horizontally see 'sidescrolloff'. -vim.o.shada = - "'100,<50,s10,:100,/100,h,r/tmp/,r/private/,rfugitive:,rzipfile:,rterm:" --- 'shada' 'sd' string (default for --- Win32: !,'100,<50,s10,h,rA:,rB: --- others: !,'100,<50,s10,h) --- global --- When non-empty, the shada file is read upon startup and written --- when exiting Vim (see |shada-file|). The string should be a comma- --- separated list of parameters, each consisting of a single character --- identifying the particular parameter, followed by a number or string --- which specifies the value of that parameter. If a particular --- character is left out, then the default value is used for that --- parameter. The following is a list of the identifying characters and --- the effect of their value. --- CHAR VALUE ~ --- *shada-!* --- ! When included, save and restore global variables that start --- with an uppercase letter, and don't contain a lowercase --- letter. Thus "KEEPTHIS and "K_L_M" are stored, but "KeepThis" --- and "_K_L_M" are not. Nested List and Dict items may not be --- read back correctly, you end up with an empty item. --- *shada-quote* --- " Maximum number of lines saved for each register. Old name of --- the '<' item, with the disadvantage that you need to put a --- backslash before the ", otherwise it will be recognized as the --- start of a comment! --- *shada-%* --- % When included, save and restore the buffer list. If Vim is --- started with a file name argument, the buffer list is not --- restored. If Vim is started without a file name argument, the --- buffer list is restored from the shada file. Quickfix --- ('buftype'), unlisted ('buflisted'), unnamed and buffers on --- removable media (|shada-r|) are not saved. --- When followed by a number, the number specifies the maximum --- number of buffers that are stored. Without a number all --- buffers are stored. --- *shada-'* --- ' Maximum number of previously edited files for which the marks --- are remembered. This parameter must always be included when --- 'shada' is non-empty. --- If non-zero, then the |jumplist| and the |changelist| are also --- stored in the shada file. --- *shada-/* --- / Maximum number of items in the search pattern history to be --- saved. If non-zero, then the previous search and substitute --- patterns are also saved. When not included, the value of --- 'history' is used. --- *shada-:* --- : Maximum number of items in the command-line history to be --- saved. When not included, the value of 'history' is used. --- *shada-<* --- < Maximum number of lines saved for each register. If zero then --- registers are not saved. When not included, all lines are --- saved. '"' is the old name for this item. --- Also see the 's' item below: limit specified in KiB. --- *shada-@* --- @ Maximum number of items in the input-line history to be --- saved. When not included, the value of 'history' is used. --- *shada-c* --- c Dummy option, kept for compatibility reasons. Has no actual --- effect: ShaDa always uses UTF-8 and 'encoding' value is fixed --- to UTF-8 as well. --- *shada-f* --- f Whether file marks need to be stored. If zero, file marks ('0 --- to '9, 'A to 'Z) are not stored. When not present or when --- non-zero, they are all stored. '0 is used for the current --- cursor position (when exiting or when doing |:wshada|). --- *shada-h* --- h Disable the effect of 'hlsearch' when loading the shada --- file. When not included, it depends on whether ":nohlsearch" --- has been used since the last search command. --- *shada-n* --- n Name of the shada file. The name must immediately follow --- the 'n'. Must be at the end of the option! If the --- 'shadafile' option is set, that file name overrides the one --- given here with 'shada'. Environment variables are --- expanded when opening the file, not when setting the option. --- *shada-r* --- r Removable media. The argument is a string (up to the next --- ','). This parameter can be given several times. Each --- specifies the start of a path for which no marks will be --- stored. This is to avoid removable media. For Windows you --- could use "ra:,rb:". You can also use it for temp files, --- e.g., for Unix: "r/tmp". Case is ignored. --- *shada-s* --- s Maximum size of an item contents in KiB. If zero then nothing --- is saved. Unlike Vim this applies to all items, except for --- the buffer list and header. Full item size is off by three --- unsigned integers: with `s10` maximum item size may be 1 byte --- (type: 7-bit integer) + 9 bytes (timestamp: up to 64-bit --- integer) + 3 bytes (item size: up to 16-bit integer because --- 2^8 < 10240 < 2^16) + 10240 bytes (requested maximum item --- contents size) = 10253 bytes. --- --- Example: >vim --- set shada='50,<1000,s100,:0,n~/nvim/shada --- < --- '50 Marks will be remembered for the last 50 files you --- edited. --- <1000 Contents of registers (up to 1000 lines each) will be --- remembered. --- s100 Items with contents occupying more then 100 KiB are --- skipped. --- :0 Command-line history will not be saved. --- n~/nvim/shada The name of the file to use is "~/nvim/shada". --- no / Since '/' is not specified, the default will be used, --- that is, save all of the search history, and also the --- previous search and substitute patterns. --- no % The buffer list will not be saved nor read back. --- no h 'hlsearch' highlighting will be restored. --- --- When setting 'shada' from an empty value you can use |:rshada| to --- load the contents of the file, this is not done automatically. --- --- This option cannot be set from a |modeline| or in the |sandbox|, for --- security reasons. -vim.o.sidescrolloff = 5 --- 'sidescrolloff' 'siso' number (default 0) --- global or local to window |global-local| --- The minimal number of screen columns to keep to the left and to the --- right of the cursor if 'nowrap' is set. Setting this option to a --- value greater than 0 while having 'sidescroll' also at a non-zero --- value makes some context visible in the line you are scrolling in --- horizontally (except at beginning of the line). Setting this option --- to a large value (like 999) has the effect of keeping the cursor --- horizontally centered in the window, as long as one does not come too --- close to the beginning of the line. --- After using the local value, go back the global value with one of --- these two: >vim --- setlocal sidescrolloff< --- setlocal sidescrolloff=-1 --- < --- Example: Try this together with 'sidescroll' and 'listchars' as in the --- following example to never allow the cursor to move onto the --- "extends" character: >vim --- --- set nowrap sidescroll=1 listchars=extends:>,precedes:< --- set sidescrolloff=1 --- < -vim.o.smartcase = true --- 'smartcase' 'scs' boolean (default off) --- global --- Override the 'ignorecase' option if the search pattern contains upper --- case characters. Only used when the search pattern is typed and --- 'ignorecase' option is on. Used for the commands "/", "?", "n", "N", --- ":g" and ":s" and when filtering matches for the completion menu --- |compl-states|. --- Not used for "*", "#", "gd", tag search, etc. After "*" and "#" you --- can make 'smartcase' used by doing a "/" command, recalling the search --- pattern from history and hitting <Enter>. -vim.o.smoothscroll = true --- 'smoothscroll' 'sms' boolean (default off) --- local to window --- Scrolling works with screen lines. When 'wrap' is set and the first --- line in the window wraps part of it may not be visible, as if it is --- above the window. "<<<" is displayed at the start of the first line, --- highlighted with |hl-NonText|. --- You may also want to add "lastline" to the 'display' option to show as --- much of the last line as possible. --- NOTE: partly implemented, doesn't work yet for |gj| and |gk|. -vim.o.splitright = true --- 'splitright' 'spr' boolean (default off) --- global --- When on, splitting a window will put the new window right of the --- current one. |:vsplit| -vim.o.statuscolumn = "%s%=%l%{%&nu||&rnu?'%#WinSeparator#│':''%}" --- 'statuscolumn' 'stc' string (default "") --- local to window --- When non-empty, this option determines the content of the area to the --- side of a window, normally containing the fold, sign and number columns. --- The format of this option is like that of 'statusline'. --- --- Some of the items from the 'statusline' format are different for --- 'statuscolumn': --- --- %l line number column for currently drawn line --- %s sign column for currently drawn line --- %C fold column for currently drawn line --- --- The 'statuscolumn' width follows that of the default columns and --- adapts to the 'numberwidth', 'signcolumn' and 'foldcolumn' option values --- (regardless of whether the sign and fold items are present). --- Additionally, the 'statuscolumn' grows with the size of the evaluated --- format string, up to a point (following the maximum size of the default --- fold, sign and number columns). Shrinking only happens when the number --- of lines in a buffer changes, or the 'statuscolumn' option is set. --- --- The |v:lnum| variable holds the line number to be drawn. --- The |v:relnum| variable holds the relative line number to be drawn. --- The |v:virtnum| variable is negative when drawing virtual lines, zero --- when drawing the actual buffer line, and positive when --- drawing the wrapped part of a buffer line. --- --- When using |v:relnum|, keep in mind that cursor movement by itself will --- not cause the 'statuscolumn' to update unless 'relativenumber' is set. --- --- NOTE: The %@ click execute function item is supported as well but the --- specified function will be the same for each row in the same column. --- It cannot be switched out through a dynamic 'statuscolumn' format, the --- handler should be written with this in mind. --- --- Examples: >vim --- " Line number with bar separator and click handlers: --- set statuscolumn=%@SignCb@%s%=%T%@NumCb@%l│%T --- --- " Line numbers in hexadecimal for non wrapped part of lines: --- let &stc='%=%{v:virtnum>0?"":printf("%x",v:lnum)} ' --- --- " Human readable line numbers with thousands separator: --- let &stc='%{substitute(v:lnum,"\\d\\zs\\ze\\' --- . '%(\\d\\d\\d\\)\\+$",",","g")}' --- --- " Both relative and absolute line numbers with different --- " highlighting for odd and even relative numbers: --- let &stc='%#NonText#%{&nu?v:lnum:""}' . --- '%=%{&rnu&&(v:lnum%2)?"\ ".v:relnum:""}' . --- '%#LineNr#%{&rnu&&!(v:lnum%2)?"\ ".v:relnum:""}' --- --- < WARNING: this expression is evaluated for each screen line so defining --- an expensive expression can negatively affect render performance. --- -vim.o.tagcase = "match" --- 'tagcase' 'tc' string (default "followic") --- global or local to buffer |global-local| --- This option specifies how case is handled when searching the tags --- file: --- followic Follow the 'ignorecase' option --- followscs Follow the 'smartcase' and 'ignorecase' options --- ignore Ignore case --- match Match case --- smart Ignore case unless an upper case letter is used -vim.o.title = true --- 'title' boolean (default off) --- global --- When on, the title of the window will be set to the value of --- 'titlestring' (if it is not empty), or to: --- filename [+=-] (path) - Nvim --- Where: --- filename the name of the file being edited --- - indicates the file cannot be modified, 'ma' off --- + indicates the file was modified --- = indicates the file is read-only --- =+ indicates the file is read-only and modified --- (path) is the path of the file being edited --- - Nvim the server name |v:servername| or "Nvim" -vim.o.undofile = true --- 'undofile' 'udf' boolean (default off) --- local to buffer --- When on, Vim automatically saves undo history to an undo file when --- writing a buffer to a file, and restores undo history from the same --- file on buffer read. --- The directory where the undo file is stored is specified by 'undodir'. --- For more information about this feature see |undo-persistence|. --- The undo file is not read when 'undoreload' causes the buffer from --- before a reload to be saved for undo. --- When 'undofile' is turned off the undo file is NOT deleted. -vim.o.updatetime = 250 --- 'updatetime' 'ut' number (default 4000) --- global --- If this many milliseconds nothing is typed the swap file will be --- written to disk (see |crash-recovery|). Also used for the --- |CursorHold| autocommand event. -vim.opt.wildignore:append({ "*.pyc", "__pycache__", "*~", "#*#", "*.o" }) --- 'wildignore' 'wig' string (default "") --- global --- A list of file patterns. A file that matches with one of these --- patterns is ignored when expanding |wildcards|, completing file or --- directory names, and influences the result of |expand()|, |glob()| and --- |globpath()| unless a flag is passed to disable this. --- The pattern is used like with |:autocmd|, see |autocmd-pattern|. --- Also see 'suffixes'. --- Example: >vim --- set wildignore=*.o,*.obj --- < The use of |:set+=| and |:set-=| is preferred when adding or removing --- a pattern from the list. This avoids problems when a future version --- uses another default. -vim.o.wildignorecase = true --- 'wildignorecase' 'wic' boolean (default off) --- global --- When set case is ignored when completing file names and directories. --- Has no effect when 'fileignorecase' is set. --- Does not apply when the shell is used to expand wildcards, which --- happens when there are special characters. -vim.o.wildmode = "longest:full,full" --- 'wildmode' 'wim' string (default "full") --- global --- Completion mode used for the character specified with 'wildchar'. --- This option is a comma-separated list of up to four parts, --- corresponding to the first, second, third, and fourth presses of --- 'wildchar'. Each part is a colon-separated list of completion --- behaviors, which are applied simultaneously during that phase. --- --- The possible behavior values are: --- "" Only complete (insert) the first match. No further --- matches are cycled or listed. --- "full" Complete the next full match. Cycles through all --- matches, returning to the original input after the --- last match. If 'wildmenu' is enabled, it will be --- shown. --- "longest" Complete to the longest common substring. If this --- doesn't extend the input, the next 'wildmode' part is --- used. --- "list" If multiple matches are found, list all of them. --- "lastused" When completing buffer names, sort them by most --- recently used (excluding the current buffer). Only --- applies to buffer name completion. --- "noselect" If 'wildmenu' is enabled, show the menu but do not --- preselect the first item. --- If only one match exists, it is completed fully, unless "noselect" is --- specified. --- --- Some useful combinations of colon-separated values: --- "longest:full" Start with the longest common string and show --- 'wildmenu' (if enabled). Does not cycle --- through full matches. --- "list:full" List all matches and complete first match. --- "list:longest" List all matches and complete till the longest --- common prefix. --- "list:lastused" List all matches. When completing buffers, --- sort them by most recently used (excluding the --- current buffer). --- "noselect:lastused" Do not preselect the first item in 'wildmenu' --- if it is active. When completing buffers, --- sort them by most recently used (excluding the --- current buffer). --- --- Examples: >vim --- set wildmode=full --- < Complete full match on every press (default behavior) >vim --- set wildmode=longest,full --- < First press: longest common substring --- Second press: cycle through full matches >vim --- set wildmode=list:full --- < First press: list all matches and complete the first one >vim --- set wildmode=list,full --- < First press: list matches only --- Second press: complete full matches >vim --- set wildmode=longest,list --- < First press: longest common substring --- Second press: list all matches >vim --- set wildmode=noselect:full --- < First press: show 'wildmenu' without completing or selecting --- Second press: cycle full matches >vim --- set wildmode=noselect:lastused,full --- < Same as above, but buffer matches are sorted by time last used --- More info here: |cmdline-completion|. -vim.o.winborder = "none" --- 'winborder' string (default "") --- global --- Defines the default border style of floating windows. The default value --- is empty, which is equivalent to "none". Valid values include: --- - "bold": Bold line box. --- - "double": Double-line box. --- - "none": No border. --- - "rounded": Like "single", but with rounded corners ("╭" etc.). --- - "shadow": Drop shadow effect, by blending with the background. --- - "single": Single-line box. --- - "solid": Adds padding by a single whitespace cell. --- - custom: comma-separated list of exactly 8 characters in clockwise --- order starting from topleft. Example: >lua --- vim.o.winborder='+,-,+,|,+,-,+,|' --- < diff --git a/nvim/dot-config/nvim-final/lua/mo/zen.lua b/nvim/dot-config/nvim-final/lua/mo/zen.lua deleted file mode 100644 index eb674ba..0000000 --- a/nvim/dot-config/nvim-final/lua/mo/zen.lua +++ /dev/null @@ -1,89 +0,0 @@ -local M = {} -M.themes = { - dark = { - "seoulbones", - "rosebones", - "forestbones", - "zenwritten", - }, - light = { - "seoulbones", - "vimbones", - "rosebones", - "forestbones", - }, -} -M.current = { - dark = 1, - light = 1, -} -M.bg = "dark" - -M.cycle = function() - M.current[M.bg] = M.current[M.bg] + 1 - if M.current[M.bg] > #M.themes[M.bg] then M.current[M.bg] = 1 end - M.set() -end - -M.set = function() - vim.o.background = M.bg - local theme = M.themes[M.bg][M.current[M.bg]] - vim.print("Switching to " .. theme) - - vim.g[theme .. "_compat"] = 1 - vim.cmd.colorscheme(theme) - - -- make strings nonitalic - local str_highlight = - vim.api.nvim_get_hl(0, { name = "String", link = false }) - vim.api.nvim_set_hl( - 0, - "String", - { fg = str_highlight.fg, italic = false, force = true } - ) - - -- make booleans nonitalic and bold - local bool_highlight = - vim.api.nvim_get_hl(0, { name = "Boolean", link = false }) - vim.api.nvim_set_hl( - 0, - "Boolean", - { fg = bool_highlight.fg, italic = false, bold = true, force = true } - ) - - -- make normals in seoulbones darker - if theme == "seoulbones" and M.bg == "dark" then - local norm_highlight = - vim.api.nvim_get_hl(0, { name = "Normal", link = false }) - vim.api.nvim_set_hl( - 0, - "Normal", - { fg = norm_highlight.fg, bg = "#313131", force = true } - ) - end -end - -M.togglebg = function() - M.bg = M.bg == "dark" and "light" or "dark" - M.set() -end - ----@param theme string? ----@param bg "dark"|"light"|nil -M.setup = function(theme, bg) - vim.cmd("packadd zenbones.nvim") - if bg then M.bg = bg end - if theme then - for i, th in ipairs(M.themes[M.bg]) do - if th == theme then - M.current[M.bg] = i - break - end - end - end - M.set() - vim.keymap.set("n", "<F3>", M.cycle, {}) - vim.keymap.set("n", "<F12>", M.togglebg, {}) -end - -return M diff --git a/nvim/dot-config/nvim-final/nvim-pack-lock.json b/nvim/dot-config/nvim-final/nvim-pack-lock.json deleted file mode 100644 index 506d313..0000000 --- a/nvim/dot-config/nvim-final/nvim-pack-lock.json +++ /dev/null @@ -1,12 +0,0 @@ -{ - "plugins": { - "nvim-treesitter": { - "rev": "300b906a9514d5e0ce02911d371445382fe35a31", - "src": "https://github.com/nvim-treesitter/nvim-treesitter" - }, - "zenbones.nvim": { - "rev": "4635a3f46d1066975d1074cd9f61f93cb1e32f64", - "src": "https://github.com/zenbones-theme/zenbones.nvim" - } - } -}
\ No newline at end of file diff --git a/nvim/dot-config/nvim-final/plugin/autocommands.lua b/nvim/dot-config/nvim-final/plugin/autocommands.lua deleted file mode 100644 index b64ac07..0000000 --- a/nvim/dot-config/nvim-final/plugin/autocommands.lua +++ /dev/null @@ -1,7 +0,0 @@ -vim.api.nvim_create_autocmd("BufWritePre", { - pattern = "*", - callback = function(ev) - vim.cmd('execute "normal! mz" | keeppatterns %s/\\v\\s+$//e | normal `z') - end, - desc = "Strip whitespace from file" -}) diff --git a/nvim/dot-config/nvim-final/plugin/treesitter.lua b/nvim/dot-config/nvim-final/plugin/treesitter.lua deleted file mode 100644 index 1fb4503..0000000 --- a/nvim/dot-config/nvim-final/plugin/treesitter.lua +++ /dev/null @@ -1,42 +0,0 @@ -local disabled = {} -local ft_lang_map = {} - -vim.api.nvim_create_autocmd("FileType", { - group = vim.api.nvim_create_augroup("treesitter_highlight_augroup", {clear = true}), - callback = function(ev) - local buf = ev.buf - if vim.api.nvim_buf_is_loaded(buf) then - local ft = vim.bo[buf].filetype - if not disabled[ft] then - if ft_lang_map[ft] then - vim.treesitter.language.register(ft_lang_map[ft], ft) - ft_lang_map[ft] = nil - end - local parser = vim.treesitter.get_parser(buf, nil, { error = false }) - if parser == nil then - disabled[ft] = true - else - if not vim.treesitter.highlighter.active[buf] then - vim.treesitter.highlighter.new(parser) - end - end - end - end - --(when (vim.api.nvim_buf_is_loaded buf) - -- (let [ft (. vim.bo buf :filetype)] - -- (when (not (. disabled ft)) - -- (case (. ft-lang-map ft) - -- lang (do - -- (vim.treesitter.language.register lang ft) - -- (tset ft-lang-map ft nil))) - -- (case (vim.treesitter.get_parser buf nil {:error false}) - -- nil (tset disabled ft true) - -- parser (do - -- (when (not (. vim.treesitter.highlighter.active buf)) - -- (vim.treesitter.highlighter.new parser)) - -- (when (vim.treesitter.query.get ft :folds) - -- (set vim.wo.foldmethod :expr) - -- (set vim.wo.foldexpr "v:lua.vim.treesitter.foldexpr()"))))))))) - - end -}) diff --git a/nvim/dot-config/nvim-final/stylua.toml b/nvim/dot-config/nvim-final/stylua.toml deleted file mode 100644 index 4ac5841..0000000 --- a/nvim/dot-config/nvim-final/stylua.toml +++ /dev/null @@ -1,12 +0,0 @@ -call_parentheses = "Always" -collapse_simple_statement = "Always" -column_width = 80 -indent_type = "Spaces" -indent_width = 4 -line_endings = "Unix" -quote_style = "AutoPreferDouble" -space_after_function_names = "Never" -syntax = "LuaJIT" - -[sort_requires] -enabled = true |